Precision Sensors - Featured News


	A45C Series Altitude Switch
		View complete product information
	The A45C is our most sensitive skeletal altitude switch for use with air or inert gas. The altitude switch is used in aircraft cabin pressure systems, nitrogen radar cooling launches and many experimental rockets or balloon applications. In one balloon application, the A45C altitude switch triggers an automatic "cut down" system to release experimental equipment if a balloon sinks below a height that would pose a safety hazard to aircraft flights. At a lower height a parachute will be deployed to ensure that the payload safely reaches the ground. Features: Easy to install - no plumbing to hook-up Lightweight -<1.5 oz

	V21F Series Flow Switch
		View complete product information
	The V21F series flow switch is a hermetic sealed switch designed for ultimate performance and reliability. In the M1 Abrams tank, the V21F flow switch insures that coolant flow is available to cool the crew compartment. Features: Inline mounting Nonmagnetic operation Pressure and attitude mountin

	ETM Series Switch
	Precision Sensors is pleased to introduce a Subminiature D compatible time delay unit.

	The ETM series of electronic delay allows for easy integration of a time delay circuit to existing electromechanical switches using a D-Sub connector. The unit uses a male and female connector to plug into existing installations. The time delay circuit employs a unique concept that requires the electromechanical switch remain open or closed for a set amount of time before triggering the delay contacts. This feature increase productivity by preventing unwanted nuisance trips caused by transient and startup events. Features: Prevents nuisance trips Mates D-Sub products Reduces retrofit efforts

	P8B Series Gauge Pressure Switch
		View complete product information
	The P8B's welded stainless steel construction bellows sensor makes this design suitable for flameproof requirements and for high-pressure application. In one application the P8B- pressure switch is installed on the launch chambers in submarines. It is used for nitrogen reservoir pressure control in lightweight torpedo launchers. Features: Flame Proof Negative-rate belleville spring design for longer life, accuracy and stability Welded bellows for excellent repeatability and low actuation values

	V10F Series Flow Switch
		View complete product information
	The V10F series flow switch provides a convenient flow monitoring inline installation solution. The V10F flow switch is currently used in the hydraulic pump on the V22F Osprey engine air intake particle separator. And, was part of the EAPS modification kits installed in the V22F Ospreys deployed to Iraq. Features: Inline installation Magnetic operation Hermetically sealed switch



	Next Generation EAN and EGN series Staset
		Precision Sensors is pleased to introduce the next generation EAN and EGN Series Staset Configured for 11/8" surface mount. Available with a backlit rotating display, choice of analog output, LED indication of switch contact state, Staset® is an ideal choice for accurate long-term protection of equipment and process. FEATURES: Tamper proof switch points 5 Million cycle life UL Recognized, CE Marked View complete product information

	New! Integral D-Sub Connector
	For E36W, E48W & PV48W Series of UHP Pressure Products...

	E36W & E48W Series	PV48W Series

	1.Select desired series using the Product Locator (i.e E36W, E48W, PV48W)


	2. Click on "Configure a Part Number"


	3.Select D-Sub option under Electrical Interface.


	Semicon West 2008 July 15-17
	Location: Moscone Center, San Francisco, CA
	We invite to visit us at South Hall, Booth 2724
	Super 300 Type Pillar® Compatible Version of the P15M
	Precision Sensors introduces a Super 300 Type Pillar® compatible version of the P15M series of high purity pressure switches.
		View complete product information
	The flow through version of the P15M high purity pressure switch incorporates two Pillar® fitting ends into the housing. The specialized construction of the unit allows compatibility with higher temperatures and pressures commonly seen in applications where a Pillar® fitting is used. The flow through design allows for inline installations and minimal dead leg in the fluid system. The construction maintains all PFA and PTFE wetted surfaces and the reliable sealing system of current P15M products. FEATURES: Flow Through Construction Adjustable Setpoints All PFA/PTFE Wetted Surfaces No O-Ring Seals
	New Website Features
	Product pages reformatted Side product menu bar, in addition to the top menu, allows different ways to categorize products "Select By Application" and "Select By Part Number" helps locate products easier "Configure a Part Number" on every product page allows you to specify your own application drawing. Click here for details

Web Copyright Notice \| Web Legal Notice \| Terms & Conditions Home \| Company \| Products \| Distributor/Rep \| Ask An Engineer \| Support \| Literature \| Site Map

50 Seemans Lane
Milford, CT 06460
Tel: (203) 877-2795
Fax: (203) 877-8752